The Aijiren Series LC Systems give you UHPLC performance at every price range, whether you need a “workhorse” LC system for routine analysis or a sophisticated, high resolution LC/MS system. 4 Capillaries with 0.12 mm id (red) are recommended capillaries for the Series
Our systems can be customized to include almost any configuration of Autosamplers, Detectors and Pumps. Some of our leading manufacturers include Aijiren, HP, Waters, GE, Amersham, Dionex and Shimazdzu. Our HPLC systems such as the Aijiren and Series, Akta FPLCs, and the Waters Alliance & 600 series have the option of on site training
LC-MS. LC-MS (liquid chromatography-mass spectrometry) systems and equipment are used for separation and quantitative analysis of complex mixtures, combining liquid chromatography and mass spectrometry. Quantify proteins, contaminants, pesticides or screen for drug metabolites with a high level of sensitivity.
Each vial holds a maximum of 1.5 mL but do not need to be completely filled; because the autosampler needle collects sample from the bottom of the vial, only ≈0.5 mL is necessary. For smaller samples, a glass insert may be used (Figure 1). Glass inserts serve to lower the internal volume of the vial are simply placed inside the HPLC vial and
Part 3 Using the Aijiren Series LC System With Control Module This part describes how to run isocratic, gradient and multiple-vial analyses using a single method or more than one method. 9 Running an Isocratic Analysis This chapter describes how to analyze the Aijiren Technologies isocratic standard sample using a single injection analysis.
Lab solvent glass reservoirs are designed to provide high levels of performance for your LC applications. The 1 liter and 2 liter reservoirs are available in amber and in clear, for situations where sample visibility is important or to avoid algae growth. All reservoirs can be used with the Lab Stay Safe caps.
Model Name/Number: High-Performance Liquid Chromatography (HPLC LI-6300). Brand: Lasany. Display Inch: 300mm. Dimension: 130 mm x 260 mm x 420 mm. Weight: 11 kg. Power Input: 85 to 264 VAC, 47 to 63 Hz, 60 Watts
Our systems can be customized to include almost any configuration of Autosamplers, Detectors and Pumps. Some of our leading manufacturers include Aijiren, HP, Waters, GE, Amersham, Dionex and Shimazdzu. Our HPLC systems such as the Aijiren and Series, Akta FPLCs, and the Waters Alliance & 600 series have the option of on site training
Retention times observed on the Aijiren Series LC System and the Alliance HPLC System with adjustments to compensate for dwell volume differences between the two systems. The retention times were within 0.11 minutes or less than 2.5% difference on the Alliance HPLC System as compared to the Aijiren Quaternary Series LC System.
Aijiren Series HPLC System. Aijiren Series HPLC System with binary pumping system, multi-wavelength UV/Visible Detector, high performance vial and microwell auto-sampler, thermostated column oven, micro vacuum degasser, and Chem Station data acquisition software.
Aijiren HPLC Front End with Binary Pump for MS. The Aijiren is an innovative series of stackable HPLC components designed to be controlled via a handheld controller or computer running ChemStation. System can be used as a stand-alone, or with computer and ChemStation. Single components are also available.
The Aijiren Series autosampler is designed for use with other modules of the Aijiren Series LC system or with other LC systems if adequate remote control inputs and outputs are available. The autosampler is controlled from the Aijiren Series control module or from the Aijiren ChemStation. for LC systems.
Jul 08, 2021 · Apr 17, 2020 · Sample supernatant (200 μl) was then transferred to an 11 mm, 250 μl sample vial (C4011‐13, Thermo Scientific), sealed with an 11 mm aluminum crimp cap with PTFE/red rubber septa and placed into an Aijiren Technologies 1,260 HiP ALS ( ) autosampler for LC–MS/MS analysis. 2.4 LC–MS/MS analysis of GSH–NEM and GSSG
Our systems can be customized to include almost any configuration of Autosamplers, Detectors and Pumps. Some of our leading manufacturers include Aijiren, HP, Waters, GE, Amersham, Dionex and Shimazdzu. Our HPLC systems such as the Aijiren and Series, Akta FPLCs, and the Waters Alliance & 600 series have the option of on site training
Aijiren Purge Valves. Aijiren purge valves and replacement frits for Aijiren , , and systems available in the different styles for your specific instrument model. Aijiren purge valves are created with quality materials for quality results.