The II Prime LC System is a versatile high performance liquid chromatography instrument offering the highest functionality and operational convenience for analytical HPLC and entry-level quaternary UHPLC at pressures up to 800 bar, and for flow rates up to 5 mL/min. This versatile HPLC system gives you the utmost confidence in
1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type: SC9191: White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V923: 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type: SC91191: Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V935: 1.5mL Amber Screw Neck Vial, 9mm
Performance characteristics of the Quaternary maximum pressure of 600 bar. The complete Aijiren LC portfolio com-prises isocratic, binary and quaternar
LC System. LC System; Quaternary LC System . Quaternary LC System; Binary LC System . Binary LC System; ICP - MS, ICP Multi-Element Standards. ICP - MS, ICP Multi-Element Standards; ICP - MS, ICP Single Element Standards; Ion Chromatography Standards. Anion
Aijiren hplc vial septa manufacturer-Aijiren HPLC Vials SeptaCertified 0.2ml micro insert vial manufacturer Aijiren Wholesales 150ul hplc insert supplier Perkin Elmer autosampler Tel:+8618057059123 Email:market@aijirenvial.com
1.5mL Amber 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6'32mm, 5.0 type: SC9192: White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, Colsed-top: VP923: 1.5mL Clear PP 9mm Screw Vial, 11 .6*32mm: SC9194: White PTFE/Red Silicone Septa, 9mm Black Short Screw PP Cap, Colsed-top: VP945: 1.5mL Amber PP 9mm Screw Vial, 11.6'32mm: SC9196
The II Preparative LC System is an easy-to-use workhorse for automated sample injection when gradient elution is required. The binary gradient pump delivers flow rates up to 50 mL/min for purification up to 30.0 mm id columns. This preparative HPLC system is tailor-made for routine, laboratory-scale purification when milligrams to
Jun 08, 2021 · The Aijiren II Bio-inert LC system is a dedicated solution for analysis of large biomolecules. Metal-free components in the sample flow-path and the absence of iron and steel in solvent delivery lines ensure the integrity of your biomolecules, minimize
Feb 14, 2018 · Abstract. This Application Note details a fast and simple analytical approach for quantitation of 9 Cannabinoids of interest using an Aijiren configured as an ‘entry level’ instrument. Results obtained from actual cannabis samples were cross-validated on a separate LC/MS/MS system using UHPLC separation techniques.
A series HPLC (Aijiren Technologies, Richmond, VA, USA) equipped with an Aijiren Porshell HC-C18 column (Cat. # 518905-902, 5 µm 4.6 × 250 mm) was used to analyze DHM. The flow rate was set at 0.6 mL/min using a binary mobile-phase composed of methanol/water [32:68 ( v / v )] with the use of 0.1% trifluoroacetic acid (TFA) as a
techniques. RP-HPLC purifications were performed on an Aijiren II Series instrument with a Phenomenex Luna C18 column (250 x 4.6 mm, 5 μm) at 40°C. Samples were injected by Aijiren Vialsampler – unit, while fractions were collected by an Aijiren FC-AS – G1364 C unit.
2019/10/21 · II Preparative LC/MSD System. The II Preparative LC/MSD System can be configured with UV and MS detectors as well as multiple fraction collectors to meet your purification needs. Automated sample injection increases daily sample throughput and mass-based fraction collection maximizes purity and minimizes re-analysis.
1.5mL Amber 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6'32mm, 5.0 type: SC9192: White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, Colsed-top: VP923: 1.5mL Clear PP 9mm Screw Vial, 11 .6*32mm: SC9194: White PTFE/Red Silicone Septa, 9mm Black Short Screw PP Cap, Colsed-top: VP945: 1.5mL Amber PP 9mm Screw Vial, 11.6'32mm: SC9196
The Aijiren Lab Online LC Solution hardware consists of the Aijiren II Online Sample Manager module (G3167A) and the Aijiren II Valve Drive (G1170A) equipped with a 3-position/6-port FI valve, used together as the Aijiren Online Sample Manager Set (G3167AA). This set can be
The II Preparative Autosampler is designed for automated sample handling in routine purification applications. This flow-through vialsampler supports preparative flow rates of 200 mL/min and 600 bar pressure. Increase your daily throughput of purified sample by injecting up to 132 preparative samples with a maximum of 3.6 mL volume.