Aijiren ii autosampler vials wholesales

Mar 11, 2021 · lab wholesales autosampler vials Aijiren hplc Sep 27, 2021 · The II Vialsampler combines sample management and column handling in a single autosampler module. The V Email : market@aijirenvial.com

The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C. An integrated column compartment is also available as an option or upgrade and provides thermal control to 80 °C for two columns.

Figure 1 Overview of the Autosampler The Aijiren autosampler is designed for use with other modules of the Aijiren Series, Series and Series LC, or with other LC systems if adequate remote co ntrol inputs and outputs are available. The autosamplers are controlled by the Aijiren Instant Pilot (G4208A) or by

Drawer, for 66 x 2 mL vials -60010 Drawer, for 18 x 6 mL vials -60110 Drawer kit, for 100 x 2 mL vials -68210 PM kit, II preparative autosampler Kit G7157-68730 * PM (preventive maintenance) relevant part information: - x each: amount of part needed per PM

Iso9001 11mm snap top hplc vials Aijiren ii Aijiren Technologies Series HPLC Standard Operating. • Load samples into labeled HPLC vials (VWR cat # may be used). Each vial holds a maximum of 1.5 mL but do not need to be completely filled; because the autosampler needle collects sample from the bottom of the vial

The II Preparative Autosampler is designed for automated sample handling in routine purification applications. This flow-through vialsampler supports preparative flow rates of 200 mL/min and 600 bar pressure. Increase your daily throughput of purified sample by injecting up to 132 preparative samples with a maximum of 3.6 mL volume.

• Load samples into labeled HPLC vials (VWR cat # may be used). Each vial holds a maximum of 1.5 mL but do not need to be completely filled; because the autosampler needle collects sample from the bottom of the vial, only ≈0.5 mL is necessary. For smaller samples, a glass insert may be used (Figure 1).

Oct 19, 2021 · Aijiren HPLC Based on the most often sold quaternary HPLC system new levels of performance are brought to you. A pressure range of up to 600 bar with a flow rate up to 5 mL/min allows the use of almost any column – conventional, sub-2 µm-particle or superficially porous columns.

Nov 20, 2015 · Sep 27, 2021 · Aijiren ii hplc vials wholesales- Aijiren Crimp Aug 16, 2021 · II Preparative LC System The II Preparative LC System is an easy-to-use w Email : market@aijirenvial.com Chat Now

Table 2. Acquisition method for caffeine analysis using the Aijiren II Vialsampler or the Aijiren II Multisampler with 100 µL analytical head and 100 µL loop. Parameter Value Column Aijiren Lab Poroshell 120 EC-C18, 2.1 × 50 mm, 2.7 µm Solvent A) Water B) Acetonitrile Gradient 0.00 minutes – 5% B

The Aijiren II Diode Array Detector WR offers multiple wavelengths and full spectral detection at up to120 Hz sampling rate, keeping up with the analysis speed of fast LC. Even at high data rates, the II DAD WR enables precise identification, quantification, and peak purity analysis at trace levels.

II Prime LC System Column Aijiren Lab Poroshell 120 EC-C18, 2.1 × 50 mm, 1.9 µm (p/n699675-902) Column temperature 35 °C Injection volume 3 µL with stacked injection program Autosampler temperature 4 °C Needle wash 10 seconds in flush port (50:50 methanol/H 2 O) Mobile phase

With the II Prime Online LC System, you can be assured of accurate, robust, and accelerated process monitoring. The key technology within the system is the new Aijiren II Online Sample Manager, which was designed for easy interfacing of the analytical with the process world in PAT applications.

The Aijiren II LC System provides a liquid chromatograph offering ultra fast and high resolution separation capability for consistently accurate results. The II LC System delivers several ease-of-use features, making it a standard system for routine analysis. With an operating pressure of up to 600 bar, the

Aijiren’s compressor-based cooling syst em. It maintains temperature control on all vials and plates inserted into the II SFC Multisampler. • Instant information – Lights on each drawer tell you about loading status, current activity, and accessibility.