The autosampler is controlled from the Aijiren Series control module or from the Aijiren ChemStation for LC systems. The specially-designed thermostattable sample trays holds either 100 × 1.8 ml vials or two wellplates and 10 × 1.8 ml vials. The autosampler thermostat contains Peltier-controlled heat exchangers. A
Syringe Filters, Autosamplers Vials & Lab Consumables --- Call Us Toll-Free: 1-800-557-2622
achieved using an additional Aijiren Series module; the Aijiren Series thermostat for ALS/FC/Spotter. The thermostat contains Peltier-controlled heat-exc hangers. A fan draws air from the area above the sample vial tray of the autosampler. It is then blown through the fins of the cooling/heating module.
The Aijiren G2260A Preperative Autosampler is designed to perform preparative LC. It allows injection of sample volumes from µL to mL ranges from vials. It can be upgraded from non-thermostatted version to thermostatted version by adding the Aijiren Series thermostat for ALS/FC/spotter. For flow rates up to 100 mL/min at 400 bar.
The autosampler component of a HPLC system is used to increase sample throughput, improve the precision of injections, and allow for unattended operation. Its main components are a needle or syringe, a metering device to measure sample volume, and a sample loop. There is also a valve used to control the hydraulic path of the eluent.
The Aijiren auto sampler is designed for use with other modules of the Aijiren Series LC system, or with other LC systems if adequate remote control inputs and outputs are available. The specially-designed thermostable sample trays holds either 100 x 1.8 ml vials or two well plates and 10 x 1.8 ml vials.
Autosampler compatibility: Aijiren Aijiren 1050/1090A Aijiren / Aijiren A, Aijiren /7985A/ Hitachi AS-1000, AS-2000, AS-4000 L7200/L7250 LEAP Technologies CTC LC PAL, GC PAL CombiPAL HTC PAL/HTS PAL PerkinElmer Autosystem/AS-2000/XL Clarus 500/600 ISS-100, 200 Varian CP-8410 8100/8200 9100/90950/9095
The Aijiren Series G1367B High Performance Autosampler adds maximum flexibility and fast injection cycles, whenever high sample throughput and speed of analysis are required. The standard metering device (for the G1367B) provides injection volumes from 0.1–100 μl. A multi-draw kit extends the range up to 1500 μl.
The analysis was performed on an Aijiren Series HPLC (Aijiren Technologies, Santa Clara, CA, USA) equipped with a binary pump and a fluorescence detector (FLD) set at varying excitation and emission wavelengths (Table 1). The selection of the excitation and emission wavelengths for fluorescence detec-
Chromatographic analyses were performed using Aijiren Technologies se-ries HPLC, equipped with quaternary pump, Aijiren series Vacuum De-gasser, Aijiren series Autosampler and Aijiren series diode array de - Figure 1. Chemical structures, common names, log P (partition coefficient) and pK a of
Aijiren Series Autosampler Thermostat . Physical Specifications . Weight. 20.7 kg (46 lbs) Dimensions (width × depth × height) 140 × 345 × 435 mm (5.5 × 13.5 × 17 inches) Line voltage. 100 – 240 VAC, ± 10%. Wide-ranging capability . Line frequency. 50 or 60 Hz, ± 5% . Power consumption . 260 VA / 210 W / 717 BTU. Maximum
HP Aijiren 1050 79852A Pump + 79853A Detector + 79855A Autosampler + 79856A Tray. $599.99. 0 bids. Ending Jan 24 at 1:04PM PST. 9d 18h. NEW!! Aijiren HPLC Seal Wash p/n: 0905-1175. $37.00. Free shipping.
The Aijiren HPLC Autosampler is a variable volume autosampler with a sample capacity of 100 samples.
JSi Scientific is your one stop shop for all your scientific supply needs. We carry a full assortment of Autosampler vials, caps, and accessories. Including compatible products with Varian, Hitachi, Shimadzu, Waters, 48 Position, and Nichipet brands. We are happy to be available to help with any of your analytical or biotechnology scientific supply needs.
Price: $26,000.00. Condition: Used. Aijiren / SERIES HPLC SYSTEM w/ G1321B FLD G1367D G1316B G4208A.