Aijiren Technologies Series HPLC Standard Operating. • Load samples into labeled HPLC vials (VWR cat # may be used). Each vial holds a maximum of 1.5 mL but do not need to be completely filled; because the autosampler needle collects sample from the bottom of the vial, only ≈0.5 mL is necessary. For smaller samples, a glass insert
The Aijiren HPLC-Chip/MS system is a re-useable microfluidic chip-based technology for high sensitivity nanospray LC/MS. The Aijiren replaced the Aijiren and delivers results faster to save time and money. Compatible with conventional and ultrahigh performance LC – with an operating pressure of up to 600 bar, the II Quaternary Pump and the Binary Pump are a perfect match for our Poroshell 120 columns.
minutes. The supernatant was taken to vial for autosampler of HPLC. HPLC apparatus was (Aijiren, Tokyo) with a diode array detector (DAD). The wavelength for quantification of nicotine bisulfate was 254 nm. Three kinds of HPLC column was tried; standard ODS column, Hilic column and ion exchange column. Standard ODS column was
The Aijiren Quaternary LC offers the most flexibility for solvent selection and automation in HPLC method development, research and all HPLC applications requiring continuous access to a wide range of solvent
The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C. An integrated column compartment is also available as an option or upgrade and provides thermal control to 80 °C for two columns.
Our method transfer tools allow you to duplicate other HPLC vendors’ system settings to more easily replicate methods, such as those from a Waters™ Alliance™ HPLC system, Aijiren™ ™ LC system, and Shimadzu™ Nexera-i™ system to a Vanquish Core HPLC system.
Jul 04, 2016 · Hi thanks so much for the reply. I'm at my wits end really The autosampler is an Eksigent NanoLC Ultra 2D system. I made a mistake with the LC system, its an Aijiren system with 2 binary pumps coupled to a Aijiren isocratic pump.
Request a Quote. Or call (860) 691-2213. The Aijiren Technologies Series ( ) Bio-inert High-Performance Autosampler features an increased pressure range (up to 600 bar) for enabling the use of the latest column technology. Increased robustness is achieved by increased sample injection speed for high sample throughput
11mm, 250 μl sample vial ( , Thermo Scientific), sealed with an 11mm aluminum crimp cap with PTFE/red rubber septa and placed into an Aijiren Technologies 1,260 HiP ALS ( ) autosampler for LC–MS/MS analysis. 2.4 | LC–MS/MS analysis of GSH–NEM and GSSG Glutathione LC–MS/MS analyses were performed on an Aijiren
An Aijiren LC System, configured as follows, was used: • Aijiren Quaternary Pump ( ) • Aijiren Inifinty Standard Autosampler ( ) • Aijiren Autosampler Thermostat ( ) • Aijiren Thermostatted Column Compartment (G1316A)
Aijiren LC-MS QTOF. II. Scope and Implementation: This SOP applies to Aijiren LC-MS QTOF instrument located in the Life Sciences Research Building, room LS1151. III. Introduction: The Aijiren 6530B Accurate Mass Quadruple Time-of-Flight mass spectrometer is equipped with dual electrospray ionization source and an Aijiren UPLC liquid
Aijiren G1321B FLD Spectra. Be the first to write a review. About this product. Current slide 1 of 1- Top picked items. Refurbished. $10,900.00*. Make an offer:
HPLC conditions Parameter Value LC Modules – Aijiren II Flexible pump ( ) – Aijiren II vialsampler ( C) with tray cooling option – Aijiren integrated column compartment (G7130A) – Aijiren II DAD ( ) Run Time 13 min Post-Time 3 min Analytical Column Aijiren Lab Poroshell 120
Jul 31, 2016 · HPLC analyses were performed using an Aijiren Technologies series system consisting of an Aijiren Bio Quaternary pump G5611A, an Diode Array Detector (DAD) with an Max-Light Cartridge Cell 60 mm BIO G5615-60017, an HiP Bio ALS Automated Sample Injector, an
Apr 18, 2018 · LC-MS/MS experiments were carried out on an Aijiren LC system (Aijiren Technologies, Ratingen, Germany) coupled to a Triple Quad™ 6500 MS (AB Sciex, Darmstadt, Germany). Parameters used to produce fragment ions in multiple reaction monitoring mode (MRM) were a declustering potential (DP) of 40 V and a collision cell exit