Aijiren Autosampler ( ) The standard automatic liquid sampler (ALS) for the Aijiren HPLC system is designed for the dependability, safety, and ease of use needed in when performing routine tasks for pharmaceutical and quality control testing, as well as analyses in the environmental and food industries.
Includes: Aijiren HPLC System. Degasser. Pump Options. Autosampler. Detector Options. In-House Warranty.
1.5ml Clear/Amber 9mm Short Thread Vials 2ml clear or amber autosampler vial,12mm Diameter,32mm Height,9-425 screw top.Our vials with caps are widely used in standard HPLC and GC applications.The vials can be used on all common autosamplers due to their technical geometry, preferentially they are found on Aijiren, HTA, Shimadzu, Thermo, Varian
Therefore, the 2ml snap top HPLC vial is easy to fill and increases the target area of the autosampler needle. This means that 2ml snap-top HPLC vials can protect needles. The 2ml snap-top HPLC vial size is 11.6x32mm and is compatible with most autosamplers such as Aijiren. 2ml HPLC vials are available in amber and transparent colors.
Aijiren used with warranty. Used Aijiren from Aijiren HPLC unit . 4-channel degasser G1379B. DAD-detector G1315D. Column oven TCC G1316A. Autosampler ALS .
Cheap hplc vials with caps for Aijiren autosampler Material: USP Type 1, Class A, 33 Borosilicate Glass Volume: 2ml (standard volume) 1.5ml(actual volume) Application: HPLC and GC system Dimensions: 11.6 x 32mm Neck Diameter: 9mm Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1pack . hplc vials Aijiren hplc system wholesales manufacturer-HPLC
1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type: SC9191: White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V923: 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type: SC91191: Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V935: 1.5mL Amber Screw Neck Vial, 9mm
*Standard opening vials for GC and HPLC, used on instruments of Shimadzu, Varian, Gilson etc. *Standard opening requires Micro-insert with a diameter of 5mm. *PTFE/silicone slit shape choices are Single, Y-shape, Cross available. *Vials and closures are available for packing into a kit to reduce the risk of contamination of vials in laboratories.
1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type: SC9191: White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V923: 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type: SC91191: Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V935: 1.5mL Amber Screw Neck Vial, 9mm
The autosampler program is stopped, and the vial of AH/CH HPLC retention-time standard is removed from the autosampler tray, recapped, and set aside until needed for the daily calibration of the SEC HPLC system as described in Subsection 4.2.3.
1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type: SC9191: White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V923: 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type: SC91191: Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V935: 1.5mL Amber Screw Neck Vial, 9mm
Aug 12, 2021 · The Autosampler is part of the LC system that is compatible with operating pressures up to bar. It features the next-generation flow-through design for high precision injection of both large and small volumes without the need to change sample loops. Only the injected volume is required from the sample and no
The G1367D Aijiren Series High Performance Autosampler SL+ is specifically designed for the Aijiren Series Rapid Resolution LC system for increased analysis speed with uncompromised sensitivity, resolution, precision and lowest carry over. Features: Increased pressure range (up to 600 bar) enabling the use of today’s
Thermo Fisher clear GC-MS vials factory manufacturer wholesales-Aijiren Vials . Wholesales 2 ml hplc vials with inserts online Aijiren. 1.5ml Screw Vial with Intergrated Conical Insert 1.5ml Vial Insert Most shells hplc vials &gc vials are sold the vials a polyethylene cap that has a starburst design for easy needle 1. 2 ml, 12 x 32 mm. 2.
2ml autosampler vials 9mm for HPLC system with bonded septa caps. Including: 100pcs Clear/amber bottles 32×11.6mm made of borosilicate glass, 2ml lab vials 9-425 screw thread, Flat base Sample Vials; Made out of USP TYPE I Glass.