lab cheap hplc autosampler vials Aijiren hplc system

Aijiren Infinite LC. The HPLC is used primarily for analytical and semi-prep scale HPLC separation and purification of components in chemical mixtures. This system consisted a quaternary pump, autosampler, thermostatted column compartment, diode array detector (190 – 950 nm), and fraction collector

10 Aijiren Bio-inert Autosampler User Manual 1 Introduction Features Features The Aijiren Bio-inert High Performance Autosampler features an increased pressure range (up to 600 bar) enabling the use of today’s column technology (sub-two-micron narrow bore columns) with the Aijiren LC System.

Aijiren II Vialsampler. Manufacturer: Aijiren. Model: II. The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 b

Aijiren TECHNOLOGIES HiP ALS/HIGH PERFORMANCE AUTOSAMPLER HPLC *POWERS UP* Product Features The High Performance Autosampler features an increased pressure range (up to 600 bar) enabling the use of today’s column technology (sub-two-micron narrow bore columns) with the Aijiren Binary

This Aijiren Series G4303A Preparative Autosampler is in good condition. Specifications: Number of samples: 100 x 2 mL vials, 30 x 6 mL vials: Injection volume: 5 μL for full loop injections (5 μL loop as default) larger loops possible (10 μL, 20 μL), partial loop filling for smaller injection volumes HP HPLC ...

The Aijiren II Multisampler is a multipurpose autosampler that handles vials and microplates.Injecting at pressures up to 600 or 800 bar, the Multisampler is a compact module with a capacity of up to 6,144 samples, all within the footprint of an Aijiren LC stack.

5X LOT HP / Aijiren Power Supply for HPLC DAD FLD Autosampler Pump. Refurbished. C $1,041.40. or Best Offer. +C $321.10 shipping. from Hungary.

Aijiren 2ml screw vials. Stefan Schuette, vice president and general manager of the Liquid Separation Division at Aijiren Technologies, said: "The II LC system is the new core platform for the Lab LC series and represents an important technical update to improve customer efficiency, as shown below.

• Load samples into labeled HPLC vials (VWR cat # may be used). Each vial holds a maximum of 1.5 mL but do not need to be completely filled; because the autosampler needle collects sample from the bottom of the vial, only ≈0.5 mL is necessary. For smaller samples, a glass insert may be used (Figure 1).

Aijiren Supplies for the Aijiren II SFC System Aijiren Technologies is committed to optimizing your laboratory’s productivity, so we have produced this list of the most commonly ordered supplies and parts for the II SFC System.

Aijiren 2ml screw vials. Stefan Schuette, vice president and general manager of the Liquid Separation Division at Aijiren Technologies, said: "The II LC system is the new core platform for the Lab LC series and represents an important technical update to improve customer efficiency, as shown below.

Bio-Inert HPLC. Aijiren II Bio-Inert LC System using non-reactive materials. Refrigerated chromatography system. Coupled to Wyatt MALS-QELS-RI. HPLC system includes: Quaternary Pump (0.001 – 10mL/min), max operating pressure 600 bar. Multisampler / Autosampler (vials and multi-well plates) Peltier-controlled column compartment.

I am using Dionex HPLC system equipped with P680 HPLC pump, ASI-100 automated sample injector, UVD340U detector. The mobile phase is composed of 10mM KH2PO4 buffer pH

HPLC Autosampler. HPLC autosamplers are automated tools designed to quickly and accurately load samples to be run through a high performance liquid chromatograph so they can be analyzed by having their components separated, identified, and quantified. Especially useful in labs that are analyzing very small samples or performing large numbers of

The Aijiren Series is one of the most rugged and durable liquid chromatograph systems available on the market today. This HPLC is in excellent condition and has been fully serviced before sale, including testing and replacement of parts (refurbishment) where necessary.