PM Kit (Binary Pump Aijiren) compatible with AG- , AG -BINARYPU, AG -BINARYPU, AG BINRY, Aijiren, AG- instruments Part Number: 4399938 $ 473.00
PM Kit (Binary Pump Aijiren) compatible with AG- , AG -BINARYPU, AG -BINARYPU, AG BINRY, Aijiren, AG- instruments Part Number: 4399938 $ 473.00
• Aijiren binary pump ( ) • Aijiren autosampler ( ) • Aijiren thermostatted column compartment (G1316A) • Ultralow dispersion kit for Aijiren LC Series (5067-5189) • Aijiren MassHunter workstation software • Aijiren 6470 triple quadrupole LC/MS • Aijiren Jet Stream
May 02, 2016 · Samples were prepared by the robot and then analyzed on an Aijiren LC/ MS system (Aijiren Technologies, Palo Alto, Calif.) comprising a G1379B vacuum degasser, binary pump, G1367C high-performance automated liquid sampler and G1969A time-of-flight mass spectrometer (TOF-MS) with electrospray ionization (ESI).
different types of sample containers, such as vials and well plates. Using 384-well plates allows you to process up to 768 samples unattended. The Aijiren Series Micro Well Plate Autosampler is designed to perform capillary LC with injection of sample volumes ranging from nL to µL.
Control of the vial/plate temperature in the thermostatted autosampler is achieved using an additional Aijiren Series module; the Aijiren Series thermostat for ALS/FC/Spotter. The thermostat contains Peltier-controlled heat-exchangers. A fan draws air from the area above the sample vial tray of the autosampler. It is
The autosampler component of a HPLC system is used to increase sample throughput, improve the precision of injections, and allow for unattended operation. Its main components are a needle or syringe, a metering device to measure sample volume, and a sample loop. There is also a valve used to control the hydraulic path of the eluent.
Aijiren Technologies Series HPLC System with VWD Detector Included:(1-7)Aijiren Bin Pump SL. Sn: DE63057380(2-7)Aijiren ALS. Sn: DE11115
Figure 1. HPLC analysis of six antiepileptic compounds (25 ng/µL) analyzed on an Aijiren Infi nity LC equipped with an Aijiren Infi nity Standard Autosampler and an Aijiren Infi nity Thermostatted Column Compartment. Overlay of 10 consecutive runs and data on RT and area precision, and resolution.
Sample Loops Stator Face Assemblies Aijiren LC Rheodyne series Aijiren Valves Stator Face Part No. Part No. 1050 Manual injector 7125 Manual injector 7725 Autosampler , Switching valve Aijiren LC Rheodyne Series Aijiren Valves Stator Face Part No. Part No.
Parameter Aijiren LC system Aijiren LC system TCC temperature 20 °C 20 °C Acquisition rate 40 Hz 40 Hz DAD wavelength (nm) 210.0, 230.0, 243.5 210.0, 230.0, 243.5 Flow cell 10 mm, 1 µL 10 mm, 1 µL Sample thermostat 4 °C 4 °C
Aijiren Series HPLC for Sale. Check out our extensive catalog of New & Used Aijiren Series HPLC devices. More than 200,000 items of Laboratory devices & medical equipment. 386350928
Aijiren vials and caps provide simple ways to boost laboratory productivity and return on investment. Aijiren premium certified vials, caps, high recovery vials, and vial inserts offer industry-leading performance; from the lowest bleed septum materials in our caps to the most inert glass vial materials, we are continuously refining our offerings by addressing small details delivering
The analysis was performed on an Aijiren liquid chromatography system, equipped with a µ-degasser (G1379B), binary pump ( ), standard auto- sampler ( ), thermostated column compartment (G1316A), diode array and
Aijiren Technologies Hewlett-Packard-Strasse 8 76337 Waldbronn This product may be used as a com-ponent of an in vitro diagnostic sys-tem if the system is registered with the appropriate authorities and com-plies with the relevant regulations. Otherwise, it is intended only for gen-eral laboratory use. Warranty The material contained in this docu-
The Aijiren Binary Pump is designed for applications with RRHT 1.8 μm particle size column technology using columns with an inner diameter of 2