Aijiren ALS. Three sample-rack sizes are available for the autosampler. The standard full-size rack holds 100 × 1.8 mL vials, while the two half-size racks provide space for 40 × 1.8 mL vials and 15 × 6 mL vials respectively. Any two half-size rack trays can be installed in the autosampler simultaneously.
below) for the HPLC. It is assumed that the mobile phase, HPLC column, and detector are available*. Individuals must complete a hands-on one-on-one training session with a TRACES staff member. Referenced Documents Aijiren ChemStation ed.07/09 (p/n G2070-91126) Aijiren II Quaternary System: Quick Start (p/n G7111-90300)
The II LC System delivers several ease-of-use features, making it a standard system for routine analysis. With an operating pressure of up to 600 bar, the II Binary Pump is suitable for multiple LC applications, handling columns over the flow rate range of up to 5 ml/min.
The Aijiren HPLC-Chip/MS system is a re-useable microfluidic chip-based technology for high sensitivity nanospray LC/MS. The Aijiren replaced the Aijiren and delivers results faster to save time and money. Compatible with conventional and ultrahigh performance LC – with an operating pressure of up to 600 bar, the
The II Preparative Fraction Collector is optimized for laboratories performing semipreparative-scale purification of milligram to low gram quantities with typical flow rates from 5 to 100 mL/min. This fraction collector fits in the modular design of the Lab LC Series, occupying minimal bench space.
The II Analytical-Scale Fraction Collector is optimized for laboratories performing analytical-scale compound purification of nanogram to milligram quantities with typical flow rates between 0.1 and 10 mL/min. The module features the full set of collection modes and is compatible with a wide variety of trigger sources.
Lab Equipment. Analytical Instruments. Chromatography & Mass Spectrometer. Aijiren II LC System Chromatography. Ref : 2337695-18-GO. Condition : Used.
Aug 03, 2021 · Equipment (Standard Configuration) Aijiren Quaternary HPLC. Mobile Phase: Methanol, Water, Acetonitrile. Detector: DAD, FLD, RID. HPLC Column: Aijiren Poroshell 120 EC-C18 HPLC Column. Initial Setup. Turn on the seven LC modules (Regardless of requirement) Ensure all the solvents have a minimum of 500 mL.
The II Bio-Inert Fraction Collector is the ideal extension to your system when you need to further investigate separated compounds. A wide range of collection vessels, including vials, microplates, or custom vessels, provide highest collection flexibility. Handling flow rates up to 10 mL/min, even separations using columns with
Aijiren hplc ii system with vwd detector & open lab standalone software oct 13 2016: 90272000: Aijiren hplc ii system with dad ...
for injection, whether you prefer vials, microtiter plates, or any combination of formats. Sample drawers are available in three heights, and you can mix shallow drawers with deeper ones to accommodate different sample sizes. • High capacity – Using shallow well-plate drawers, the II SFC
The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C.
using columns calculator5 and run on Aijiren II, Alliance e2695, and Arc HPLC systems. The chromatographic separation produced on the Arc HPLC System was comparable with the data on the Aijiren and Alliance HPLC systems (Figure 1). The Arc HPLC System resulted in a USP resolution of ≥5.8 for
Quaternary LC System. FEATURES: A maximum pressure of 600 bar to utilize smaller particle size columns for higher resolution and faster separations. Quaternary low pressure mixing pump design for binary, ternary or quaternary gradients. Allows easy solvent change for variable applications.
The II Prime LC System is a versatile high-performance liquid chromatography instrument offering the highest functionality and operational convenience for analytical HPLC and entry-level quaternary UHPLC at pressures up to 800 bar and for flow rates up to 5 mL/min.