Chromatography & Autosampler VialsFeatures: 2ml sample vial are made of high quality borosilicic acid glass,low content of free ions,low coefficient of expansion and very high che +8618057059123 market@aijirenvial.com
Chromatography & Autosampler VialsFeatures: 2ml sample vial are made of high quality borosilicic acid glass,low content of free ions,low coefficient of expansion and very high che +8618057059123 market@aijirenvial.com
Screw Top Glass HPLC 2ml Aijiren vials with ptfe liner pp cap. $0.10. 1-4mL Autosampler Vials for HPLC, UPLC, ... laboratory max pressure HPLC vials
The total-volume injection SIL-30AC autosampler features a pressure tolerance of 130 MPa as well as the world’s fastest sample injection (10 seconds), which dramatically reduces the total cycle time. It includes auto pretreatment and overlapping functions as standard, and an optional loop-injection method configuration to minimize delay volume.
The TruView LCMS Certified Amber Glass 12 x 32 mm Screw Neck Max Recovery Vial, like all Waters products, is made with the purest agents and to the highest ISO 9001 standards. The lab equipment is also certified to be within autosampler-specific dimensional tolerances for height, width, neck aperture, neck center, threads, and bottom thickness.
Trusted solutions - Swiss Labst Available in both clear and amber glass these vials can be used with crimp and snap caps Vial for VWR(Merck)-Hitachi LC Autosampler.Chromatograph +8618057059123 market@aijirenvial.com
The Autosampler AS 6.1L can inject from up to 768 positions when equipped with microtiter plates (either high or low formats) or from up to 108 standard 1.5 ml sample vials. The sample carryover is significantly minimized thanks to a highly-effective interior and exterior needle wash procedure.
These are vials are suitable for use when sample volume is limited or when you need to get maximum recovery from the vial. These vials allow small volumes to be sampled accurately by autosamplers with a recoverable volume of much less than 100 µL. High recovery, total recovery and vials with fixed inserts are all classed as microvials.
Pressure Vessels Categories 10-20L Reactor Systems 2022 Bio-Promo Offers 30-50L Reactor Systems 75-150L Reactor Systems Adapters Airfree Schlenk Glassware Ampuls Arsine Generator Autoclave Equipment Autoradiography Film Baffles Bag Rocker System Bags Balances & Accessories Bath Beads Baths Beakers BelloCell® Cell Culture Systems
Autosampler Vial Inserts Thermo Scientific™ 9mm Autosampler Inserts Clear glass or polypropylene inserts for 9mm HPLC and GC autosampler vials are available in a variety of configurations with usable volumes from 160μL to 3.5mL.
1-4mL Autosampler Vials for HPLC, UPLC, GC 16mm, 25mm Test Tubes for Water Analysis 6-20mL GC Headspace Vials
Vials Autosampler Vials, Inserts, and Closures Chromatography Autosampler Vial Inserts Chromatography Autosampler Vial Inserts Variously sized inserts designed for use with chromatography autosampler vials; designed to hold a specific sample volume. Filter By category Vials Autosampler Vials, Inserts, and Closures
These vials have a thicker glass wall to withstand higher temperature and internal pressure for the analysis of volatile gas in the vial's headspace.
Use 12x32mm Glass Autosampler Vials The High Speed Centrifuge™ has a specially designed rotor and eight (8) adapters and cushions for approved glass MicroSolv MRQ™ (1.2ml) and Max Recovery (1.8ml) single piece, heavy wall autosampler vials.
Part Number: WAT094219DV. Deactivated Clear Glass 12 x 32mm Snap Neck Vial, 2 mL Volume, 100/pkg. Part Number: WAT094219DV. ----. Buy Now. LCGC Certified Amber Glass 12 x 32mm Screw Neck Vial, with Polyethylene Septumless Cap, 2 mL Volume, Part Number: 186004133C. Waters Certified vials are tested for cleanliness by HPLC and held to tightest ...