Aijiren 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 9 mm screw caps come with your choice of cap septa constructed from either PTFE/silicone or natural red rubber.
Sep 14, 2020 · A novel HPLC method was developed and validated to simultaneously determine curcuminoids and dasatinib in a new dosage form. Excellent separation was achieved for a curcuminoids mixture and dasatinib with a ZORBAX Eclipse Plus Phenyl–Hexyl column (4.6 × 250 mm, 5 µm) and a mobile phase consisting of aqueous solution (0.2% acetic acid and 0.1% trifluoroacetic acid with the pH adjusted to 3
• Aijiren II Multicolumn Thermostat ( ) • Aijiren II Diode Array Detector HS (DAD) ( ) • Aijiren LC/MSD XT system (G6135CA) The high-sensitivity diode array detector was used with a 60 mm Max-Light Cartridge Cell to use the maximum sensitivity of the UV detector in combination with the LC/MSD XT.
Vials, open-top screw cap, 2 mL standard opening with closures, convenience pack, unassembled amber glass vial, PTFE/silicone/PTFE, pkg of × 100 ea; find Supelco-29108U MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
Notes for Aijiren LC instruments controlled by non-Aijiren Chromatography Data Systems (CDS) 14 Standard Autosampler ( , , , , G2260A ...
Oct 12, 2020 · HPLC: Chromatograms were recorded on an Aijiren II with the following components: Vialsampler, Quat Pump, MCT, DAD HS. All adenosine-containing signals were detected at 254 nm with the following method: 0–25 min 5 % CH 3 CN in 2 m m aq. tetrabutylammonium acetate buffer (pH 6.0) 5 % to 100 % CH 3 CN
LC/MS data acquired with ions ending in .9 m/z will appear in EIC as two ions ending in .9 m/z and .91 m/z. Problem: If your LC SQ acquisition method has ions that end in .9 m/z, the Extracted Ion Chromatogram (EIC) in Data Analysis will show two ions, one ending in .9 and one ending in .91 that is not part of the acquisition method.
Vials Use only Aijiren vials, the shape, and the material is optimized for maximizing instrument precision. Do not overfill the vials. Fill the vial up to 1/2 to 2/3 of the total volume. Experimental conditions Make sure that the same solvents were used between the runs. Keep the room temperature constant and under 25 degrees Celsius.
Jan 30, 2020 · (HPLC) ( Aijiren Technologies, Santa Clara, USA), which contained an autosampler , quaternary pump , and diode array de tector (DAD) DAD HS. A
Aijiren LC - Sampling Systems Product Number Module Name Minimum Firmware Revision Series Standard Autosampler A.06.10 Series Standard Autosampler A.06.10 Standard Autosampler A.06.10 G1330A/B Thermostat n/a G1367A Series Well-plate Sampler A.06.31 G1367B Series High Performance
: Pdf List Of Supported Instruments - Chromeleon 7.2.7 List of Supported Instruments - Chromeleon 7.2.7 Chromeleon 7.2.7 ation ation Chromeleon Software
Aug 06, 2021 · Common use 1.5mL 8-425 screw neck vial Aijiren -Aijiren hplc lab vials Vials 8-425 Screw Top Glass Vials These 2 mL, 12 x 32 mm 8-425 vials accommodate a variety of autosamplers originally designed for narrow neck vials.
Aijiren Inline Pressure Relief Valve Kit, ea. The Pressure Relieve Valve is designed to protect the flow cell of a Diode Array Detector (G4212A, , G7117A, G7117B and ). Aijiren strongly recommends installing the pressure relief valve at the outlet of the detector as soon as a second detector is installed like in LC/MS applications.
1Open the doors.2Locate the lamp cover. Lab LC Series Diode Array Detectors User Manual 165 Maintenance9. Replace the Deuterium Lamp 3Grab the lamp cover and pull it off (it is fixed by a magnet in the bottom of the cover). 4Unplug the lamp connector (1.) and unscrew the two lamp screws (2.) (Pozidriv).
Aijiren Technologies Series HPLC Standard Operating. • Load samples into labeled HPLC vials (VWR cat # may be used). Each vial holds a maximum of 1.5 mL but do not need to be completely filled; because the autosampler needle collects sample from the bottom of the vial, only ≈0.5 mL is necessary.